Table of Contents
Advertisement
privacy
The privacy command appears and is supported only in images with support for BPI or BPI+ encryption.
Note
This option configures the CM for BPI or BPI+ encryption. To use BPI encryption, the Cisco CMTS
must also be configured for BPI or BPI+ encryption, using the
Examples
The following example shows how to set the CM privacy TEK gracetime to 1200 seconds and enables
BPI operations for the cable modem.
router(config)# cable config-file bpi.cm
router(config-file)# privacy grace-time tek 1200
router(config-file)# service-class 1 privacy
router(config-file)# exit
router(config)#
Related Commands
Command
access-denied
cable config-file
cable privacy
channel-id
cpe max
download
frequency
option
service-class
snmp manager
timestamp
Cisco Broadband Cable Command Reference Guide
2-470
Description
Disables access to the network.
Creates a DOCSIS configuration file and enters configuration file
mode.
Enables BPI or BPI+ encryption on the Cisco CMTS.
Specifies upstream channel ID.
Specifies CPE information.
Specifies download information for the configuration file.
Specifies downstream frequency.
Provides config-file options.
Specifies service class definitions for the configuration file.
Specifies Simple Network Management Protocol (SNMP) options.
Enables time-stamp generation.
Chapter 2
Cisco CMTS Configuration Commands
cable privacy
command.
OL-1581-08
Advertisement
Table of Contents
