Cisco SR2016T-NA Reference Manual page 965

Chapter 5 Cisco CMTS Debugging Commands
debug hccp inter-db
To display debug messages for the inter-database events during HCCP operations, use the debug hccp
inter-db command in privileged EXEC mode. To disable HCCP group debug message output, use the
no form of this command.
Syntax Description error
events
Command History Release
12.1(3a)EC
12.2(4)XF1,
12.2(4)BC1
12.2(11)BC1
Usage Guidelines You must use the
any debug message output.
Examples The following example shows typical debug output for the debug hccp inter-db error command:
Router# debug hccp events
Router# debug hccp inter-db error
HCCP inter database ERROR messages debugging is on
00:38:11: NULL itemplatep in cmts_build_us_srv_flow_loc.
00:38:11: NULL flowp in cmts_build_phs
00:38:11: NULL flowp in cmts_build_phs
00:38:11: Interface C5/0/0.3 does not exist. Resetting idb mapping for sid 3 to main
interface
00:38:11: cmts_map_sid_idb(): failed to find swidb for 5.0.0.10 on Cable5/0/0
00:38:12: cmts_map_sid_idb(): failed to find swidb for 5.0.0.24 on Cable5/0/0
00:38:12: NULL parsed_datp in cmts_build_phs
00:38:12: NULL cminstp in cmts_build_classifier
00:38:12: NULL iflowp in cmts_build_classifier
00:38:12: NULL icfrp in cmts_build_classifier
00:38:12: NULL parsed_datp in cmts_build_classifier
00:38:12: NULL parsed_datp in cmts_build_us_srv_flow_loc
00:38:12: NULL itemplatep in cmts_build_us_srv_flow_loc.
The following example shows typical debug output for the debug hccp inter-db events command:
Router# debug hccp events
Router# debug hccp inter-db events
OL-1581-08
debug hccp inter-db {error | events}
no debug hccp inter-db {error | events}
Display debugging messages related to database errors that occur.
Display debugging messages related to all events that occur during database
operations.
Modification
This command was introduced.
Support was added for the N+1 (1:n) RF Switch with the Cisco uBR10012
router.
Support was added for the N+1 (1:n) RF Switch with the
Cisco uBR7246VXR router.
debug hccp events command before the debug hccp inter-db command will generate
Cisco Broadband Cable Command Reference Guide
debug hccp inter-db
5-105