Table of Contents
Advertisement
ip http ezvpn
ip http ezvpn
To enable the Cisco Easy VPN Remote web server interface, use the ip http ezvpn command in global
configuration mode. To disable the Cisco Easy VPN Remote web interface, use the no form of this
command.
Cisco uBR905 and BR925 cable access routers
Syntax Description
This command has no keywords or arguments.
Defaults
The Cisco Easy VPN Remote web interface is disabled by default.
Command Modes
Global configuration
Command History
Release
12.2(8)YJ, 12.2(15)T
Usage Guidelines
This command enables the Cisco Easy VPN Remote web server, an onboard web server that allows users
to connect an IPSec Easy VPN tunnel and to provide the required authentication information. This
allows the user to perform these functions without having to use the Cisco command-line interface.
Before using this command, you must first enable the Cisco web server that is onboard the cable access
router by entering the ip http server command. Then use the ip http ezvpn command to enable the Cisco
Easy VPN Remote web server. You can then access the web server by entering the IP address for the
router's Ethernet interface in your web browser.
The Cisco Easy VPN Remote web interface does not work with the Cable Monitor web interface in
Note
Cisco IOS Release 12.2(8)YJ. To access the Cable Monitor web interface, you must first disable the
Cisco Easy VPN Remote web interface with the no ip http ezvpn command, and then enable the Cable
Monitor with the
Examples
The following example shows how to enable the Cisco Easy VPN Remote web server interface:
Router# configure terminal
Router(config)# ip http server
Router(config)# ip http ezvpn
Router(config)# exit
Router# copy running-config startup-config
Cisco Broadband Cable Command Reference Guide
6-60
ip http ezvpn
no ip http ezvpn
Modification
This command was introduced for the Cisco uBR905 and Cisco uBR925
cable access routers.
ip http cable-monitor
command.
Chapter 6
Cable CPE Commands
OL-1581-07
Advertisement
Table of Contents
