Cisco SR2016T-NA Reference Manual page 658

Reference guide
Hide thumbs Also See for SR2016T-NA:
Table of Contents

Advertisement

show cable tech-support
Command History
Release
11.2
12.1(1a)T1
12.2(15)BC2
12.3(9a)BC
12.3(9a)BC
Usage Guidelines
The show cable tech-support command displays a large amount of configuration, run-time status, and
other information about the cable interfaces on the Cisco CMTS. The output of this command can be
provided to technical support representatives when reporting a problem.
Note
The
command. Unless the problem is clearly cable-specific, TAC personnel will typically request the
tech-support
The show cable tech-support command displays the output of a number of different show commands.
The exact output depends on the platform, configuration, and type of protocols being used. Typically, in
Cisco IOS Release 12.2(15)BC2 and earlier releases, the output includes the output from the following
commands:
Other commands could be included in the show cable tech-support output, depending on the CMTS
platform, the Cisco IOS software being used, and the cards that are installed in the chassis.
Cisco Broadband Cable Command Reference Guide
3-162
Modification
This command was introduced.
This command was modified to include information about the cable clock
card.
This command added several show pxf commands to the display on the
Cisco uBR10012 router.
The output of the command was significantly shortened by moving a
number of show commands (the ones that display information about
individual cable modems) to the show tech-support command. This release
also adds support for an option to display information about only one
specific cable interface.
The output of the command was significantly shortened by moving a
number of show commands (the ones that display information about
individual cable modems) to the show tech-support command. Also, added
support for an option to display information about only one specific cable
interface.
show tech-support
includes most of the information shown in the
output to troubleshoot any problems.
show cable modem
show cable flap-list
show cable qos profile
show cable modulation-profile
show cable spectrum-group
show cable hop
show interface cable sid
(for each cable interface)
show interface cable sid connectivity
show interface cable downstream
show interface cable upstream
show interface cable mac-scheduler
show interface cable modem
Chapter 3
(for each cable interface)
Cisco CMTS Show Commands
show cable tech-support
show
OL-1581-08

Advertisement

Table of Contents
loading

This manual is also suitable for:

Broadband cable

Table of Contents