Cisco SR2016T-NA Reference Manual page 660

show cable tech-support
------------------ show interface Cable8/1/0 modem 0 ------------------
SID
------------------ show cable modem Cable8/1/1 ------------------
MAC Address
------------------ show cable modem Cable8/1/1 connectivity ------------------
Prim
Sid
------------------ show interface Cable8/1/1 sid ------------------
Sid
------------------ show interface Cable8/1/1 sid counter ------------------
Sid
------------------ show interface Cable8/1/1 sid association ------------------
Sid
------------------ show interface Cable8/1/1 modem 0 ------------------
SID
In Cisco IOS Release 12.1(12)EC, Release 12.2(8)BC1, and later releases, you can add a timestamp to
Tip
show commands using the exec prompt timestamp command in line configuration mode.
Related Commands Command
show controllers cable
show interface cable
downstream
show running-config
show startup-config
show tech-support
show version
Cisco Broadband Cable Command Reference Guide
3-164
Priv bits Type State
IP Address
1st time Times %online
online Online
Prim MAC Address IP Address
Req-polls BW-reqs Grants
issued received issued
Prim Online IP Address
Priv bits Type State
Description
Displays information about a specific line card's interface controllers.
Displays information about the cable interface.
Displays the current run-time configuration.
Displays the configuration that was used to initially configure the
CMTS at system startup.
Displays the output from show commands that display the router's
configuration and run-time status.
Displays the configuration of the system hardware, the software
version, the names and sources of configuration files, and the boot
images.
IP address
I/F MAC Prim RxPwr
State Sid
Online time
min avg max
Type Age
Packets Frag
received complete
MAC Address Interface
IP address
Chapter 3 Cisco CMTS Show Commands
method MAC address
Timing Num BPI
(dB) Offset CPE Enb
Offline time
min avg max
Admin Sched Sfid
State Type
Concatpkts
received
VRF Name
method MAC address
OL-1581-08