Table of Contents
Advertisement
debug hccp events
debug hccp events
To display debug messages for all HCCP group interaction, use the debug hccp events command in
privileged EXEC mode. To disable HCCP group debug message output, use the no form of this
command.
Syntax Description
This command has no arguments or keywords.
Command History
Release
12.1(3a)EC
12.2(4)XF1,
12.2(4)BC1
12.2(11)BC1
Usage Guidelines
You must use the debug hccp events command to activate HCCP debugging before the other debug
hccp commands will display debugging output.
Examples
The following example shows HCCP group interaction debug message output produced when the debug
hccp events command has been activated:
Router# debug hccp events
Sep
Related Commands
Command
debug hccp
authentication
debug hccp
channel-switch
debug hccp inter-db
debug hccp plane
debug hccp sync
debug hccp timing
Cisco Broadband Cable Command Reference Guide
5-102
debug hccp events
no debug hccp events
Modification
This command was introduced.
Support was added for the N+1 (1:n) RF Switch with the Cisco uBR10012
router.
Support was added for the N+1 (1:n) RF Switch with the
Cisco uBR7246VXR router.
7 09:51:50.151:HCCP 1 0->1:HELLO Learn tran 31708
Description
Displays authentication debug messages for HCCP groups.
Displays debug messages related to an RF or channel switch that is being
used for HCCP N+1 (1:n) redundancy.
Displays debug messages for the inter-database events during HCCP
operations.
Displays debug messages for HCCP-related messages sent between the
router's control plane and data backplane.
Displays debug messages for HCCP synchronization messages.
Displays debug messages for the timing of HCCP events.
Chapter 5
Cisco CMTS Debugging Commands
OL-1581-08
Advertisement
Table of Contents
