Table of Contents
Advertisement
Chapter 4
Commands for the Cisco uBR10012 Router
Table 4-11 show pxf cpu subblocks Field Descriptions
Field
VCCI map
VCCI
Related Commands
Command
clear pxf
debug pxf
show pxf cable
show pxf cable
interface
show pxf dma
show pxf microcode
show pxf xcm
show ip mroute
OL-1581-08
Description
Displays the memory address for the Virtually Cool Common Index (VCCI)
map table for this particular VCCI. The VCCI is an index that uniquely
identifies every interface or subinterface on the PXF processor and that
quickly maps that interface to the appropriate set of services and features.
Identifies the VCCI (in hexadecimal) that is assigned to the interface or
subinterface.
Description
Clears the direct memory access (DMA) and error checking and correcting
(ECC) error counters on the PXF processor.
Enables debugging of the PXF subsystems on the active PRE1 module on
the Cisco uBR10012 router.
Displays information about the multicast echo and packet intercept features
for one or all cable interfaces.
Displays information about a particular service ID (SID) on a particular
cable interface.
Displays information for the current state of the PXF DMA buffers, error
counters, and registers.
Displays identifying information for the microcode being used on the
processor.
Displays the current state of ECC for the External Column Memory (XCM)
on the PXF processor.
Displays the contents of the IP multicast routing table.
Cisco Broadband Cable Command Reference Guide
show pxf cpu
4-77
Advertisement
Table of Contents
