Table of Contents
Advertisement
Chapter 3
Cisco CMTS Show Commands
In Cisco IOS Release 12.1(12)EC, Release 12.2(8)BC1, and later releases, you can add a timestamp to
Tip
show commands using the exec prompt timestamp command in line configuration mode.
Related Commands
Command
cable modem vendor
show cable device
access-group
show cable host
access-group
show cable modem
show cable modem
classifiers
show cable modem
cnr
show cable modem
connectivity
show cable modem
cpe
show cable modem
errors
show cable modem
flap
show cable modem
maintenance
show cable modem
remote-query
show cable
modulation-profile
show interface cable
modem
show interface cable
sid
OL-1581-08
Description
Associates the name of a vendor with its Organizational Unique Identifier
(OUI).
Displays a list of CMs and their CPE devices, along with their access groups.
Displays a list of hosts and other CPE devices, along with their access
groups.
Displays information for the registered and unregistered CMs.
Displays information about the classifiers for a particular CM.
Displays information about the upstream carrier-to-noise ratio (CNR) for a
particular cable modem.
Displays connectivity statistics for one or more CMs.
Displays the CPE devices accessing the cable interface through a particular
CM.
Displays error statistics for one or more CMs.
Displays flap list statistics for one or more cable modems.
Displays station maintenance (SM) error statistics for one or more cable
modems.
Displays information collected by the remote-query feature.
Displays modulation profile group information.
Displays information about the CMs connected to a particular cable
interface.
Displays cable interface information.
Cisco Broadband Cable Command Reference Guide
show cable modem access-group
3-67
Advertisement
Table of Contents
