Cisco SR2016T-NA Reference Manual page 1029

Chapter 6 Cable CPE Commands
...switching to SW IPSec crypto engine
Router#
Related Commands Command
clear crypto engine accelerator
counter
crypto ca
crypto cisco
crypto dynamic-map
crypto ipsec
crypto isakmp
crypto key
crypto map
debug crypto engine
accelerator control
debug crypto engine
accelerator packet
show crypto engine accelerator
ring
show crypto engine accelerator
sa-database
show crypto engine accelerator
statistic
show crypto engine brief
show crypto engine
configuration
show crypto engine
connections
OL-1581-07
Description
Resets the statistical and error counters for the hardware accelerator
to zero.
Defines the parameters for the certification authority used for a
session.
Defines the encryption algorithms and other parameters for a
session.
Creates a dynamic map crypto configuration for a session.
Defines the IPSec security associations and transformation sets.
Enables and defines the IKE protocol and its parameters.
Generates and exchanges keys for a cryptographic session.
Creates and modifies a crypto map for a session.
Displays each control command as it is given to the crypto engine.
Displays information about each packet sent for encryption and
decryption.
Displays the contents of command and transmit rings for the crypto
engine.
Displays the active (in-use) entries in the crypto engine security
association (SA) database.
Displays the current run-time statistics and error counters for the
crypto engine.
Displays a summary of the configuration information for the crypto
engine.
Displays the version and configuration information for the crypto
engine.
Displays a list of the current connections maintained by the crypto
engine.
Cisco Broadband Cable Command Reference Guide
crypto engine accelerator
6-27