Table of Contents
Advertisement
Chapter 3
Cisco CMTS Show Commands
•
•
•
In Cisco IOS Release 12.1(12)EC, Release 12.2(8)BC1, and later releases, you can add a timestamp to
Tip
show commands using the exec prompt timestamp command in line configuration mode.
Related Commands
Command
cable modem vendor
show cable modem
show cable modem
cnr
show cable modem
flap
show cable modem
maintenance
show cable modem
remote-query
show cable
modulation-profile
show interface cable
modem
show interface cable
sid
OL-1581-08
A graphical display, using pound signs (#), of the number of CMs that came online at this particular
point in time. Each CM is presented by four pound signs.
A numerical count of the number of CMs that came online at this particular point in time.
A tilde (~) represents a gap of more than one second appears between two lines.
Description
Associates the name of a vendor with its Organizational Unique Identifier
(OUI).
Displays information for the registered and unregistered CMs.
Displays information about the upstream carrier-to-noise ratio (CNR) for a
particular cable modem.
Displays flap list statistics for one or more cable modems.
Displays station maintenance (SM) error statistics for one or more cable
modems.
Displays information collected by the remote-query feature.
Displays modulation profile group information.
Displays information about the CMs connected to a particular cable
interface.
Displays cable interface information.
show cable modem connectivity
Cisco Broadband Cable Command Reference Guide
3-77
Advertisement
Table of Contents
