Snmp Manager - Cisco SR2016T-NA Reference Manual

Chapter 2 Cisco CMTS Configuration Commands

snmp manager

To create a DOCSIS configuration file that specifies the IP address for the Simple Network Management
Protocol (SNMP) manager, use the snmp manager command in cable config-file configuration mode.
To disable this function, use the no form of this command.
Syntax Description ip-address
Defaults
No SNMP manager is defined.
Command Modes Cable config-file configuration
Command History Release
12.1(2)EC1
12.2(4)BC1
Usage Guidelines For SNMP commands that affect the operation of the CMTS, see the Cisco IOS Configuration
Fundamentals Command Reference Guide.
Examples The following example shows how to specify the IP address of the SNMP manager in a DOCSIS
configuration file:
router(config)# cable config-file snmp.cm
router(config-file)# snmp manager 10.10.1.1
router(config-file)# exit
router(config)#
Related Commands Command
cable config-file
access-denied
channel-id
cpe max
download
frequency
option
OL-1581-08
snmp manager ip-address
no snmp manager
Specifies an IP address for the SNMP manager.
Modification
This command was introduced.
Support was added to the Release 12.2 BC train.
Description
Creates a DOCSIS configuration file and enters configuration file
mode.
Disables access to the network.
Specifies upstream channel ID.
Specifies CPE information.
Specifies download information for the configuration file.
Specifies downstream frequency.
Provides config-file options.
Cisco Broadband Cable Command Reference Guide
snmp manager
2-475