Table of Contents
Advertisement
show cable l2-vpn vc-map
show cable l2-vpn vc-map
To display the mapping of one or all cable modems to permanent virtual connections (PVC) on
Asynchronous Transfer Mode (ATM) interfaces, use the show cable l2-vpn vc-map command in
privileged EXEC mode.
Syntax Description
mac-address
customer cust-name
Defaults
Displays information for all cable modems that have a defined ATM PVC mapping.
Command Modes
Privileged EXEC
Command History
Release
12.2(11)BC3
12.2(15)BC2
Usage Guidelines
This command displays the cable modem to ATM PVC mappings that have been defined using the
vc-map
cable modem, and the ATM interface and PVC/PVI to which it has been mapped.
The customer option displays only those PVC mappings that have been configured with a particular
Tip
customer name, using the
Examples
The following example shows typical output for the show cable l2-vpn vc-map command for all cable
modems that are mapped to ATM PVCs:
Router# show cable l2-vpn vc-map
MAC Address
0010.7bed.9c95 ATM2/0.2
0007.0e03.69f9 ATM2/0.1
Router#
The following example shows typical output for a particular cable modem with the MAC address of
0001.0203.0405:
Router# show cable l2-vpn vc-map 0001.0203.0405
MAC Address
Cisco Broadband Cable Command Reference Guide
3-38
show cable l2-vpn vc-map [mac-address] [customer cust-name]
(Optional) Displays the mapping for the cable modem with the specified
hardware (MAC).
(Optional) Displays the PVC mappings for this particular customer name.
Modification
This command was introduced for Cisco uBR7100 series and
Cisco uBR7246VXR universal broadband routers.
Support was added for the customer option.
command. It displays the MAC address, service ID (SID), and cable interface being used by the
cable vc-map
ATM Intf
ATM Intf
command.
VPI/VCI
Cable Intf
SID
1/2
Cable4/0
3
1/1
Cable4/0
1
VPI/VCI
Cable Intf
SID
Chapter 3
Cisco CMTS Show Commands
Priv Bits
0
0
Priv Bits
cable
OL-1581-08
Advertisement
Table of Contents
