Cisco SR2016T-NA Reference Manual page 1098

Reference guide
Hide thumbs Also See for SR2016T-NA:
Table of Contents

Advertisement

show controllers cable-modem lookup-table
In Cisco IOS Release 12.2(8)T and later releases, you can add a timestamp to show commands using the
Tip
exec prompt timestamp command in line configuration mode.
Related Commands
Command
show controllers cable-modem
show controllers cable-modem
bpkm
show controllers cable-modem
crypto des
show controllers cable-modem
filters
show controllers cable-modem
mac
show controllers cable-modem
phy
show controllers cable-modem
tuner
Cisco Broadband Cable Command Reference Guide
6-96
Description
Displays high-level controller information about the cable interface.
Displays information about the baseline privacy key management
exchange between the cable interface and the CMTS.
Displays information about the Data Encryption Standard (DES)
engine registers.
.Displays the registers in the MAC hardware that are used for
filtering received frames.
Displays detailed MAC-layer information for the cable interface.
Displays the contents of the registers used in the downstream
physical hardware of the cable interface.
Displays the settings for the upstream and downstream tuners used
by the cable interface.
Chapter 6
Cable CPE Commands
OL-1581-07

Advertisement

Table of Contents
loading

This manual is also suitable for:

Broadband cable

Table of Contents