Cisco SR2016T-NA Reference Manual page 475

Reference guide
Hide thumbs Also See for SR2016T-NA:
Table of Contents

Advertisement

Chapter 2
Cisco CMTS Configuration Commands
penalty-period
To specify the time period that an enforced quality of service (QoS) profile should be in force for
subscribers that violate their registered QoS profile, use the penalty-period command in enforce-rule
configuration mode. To reset an enforce-rule to its default penalty period, use the no form of this
command.
Syntax Description
minutes
Defaults
10080 minutes (7 days)
Command Modes
Enforce-rule configuration
Command History
Release
12.2(15)BC1
Usage Guidelines
When a subscriber over-consumes the maximum bandwidth that is specified in their enforce-rule, the
CMTS can automatically switch them to an enforced QoS profile for the penalty period specified with
the penalty-period command. When the penalty period expires, the CMTS restores the subscriber to
their registered QoS profile.
The penalty period continues across reboots of the cable modem, so a user cannot avoid the enforced
QoS profile by trying to reset their modem and reregister on the cable network. This allows service
providers to set an appropriate penalty for those users that consistently exceed the maximum bandwidth
they have been allocated.
To manually move a cable modem back to its registered profile before the end of the penalty period, use
Note
the cable modem mac-address qos profile id command.
When you change the configuration of a currently active enforce-rule, that rule begins using the new
configuration immediately to manage the cable modems tracked by this enforce-rule.
If a cable modem has multiple service flows, and the cable modem enters the penalty period because one
Note
of its service flows has exceeded its allowable bandwidth, monitoring on the other service flows stops
until the modem exits the penalty period.
OL-1581-08
penalty-period minutes
no penalty-period
Modification
This command was introduced.
The valid range is 1 to 10080 minutes (7 days), with a default value of
10080 minutes (7 days).
Cisco Broadband Cable Command Reference Guide
penalty-period
2-463

Advertisement

Table of Contents
loading

This manual is also suitable for:

Broadband cable

Table of Contents