Cisco SR2016T-NA Reference Manual page 504

Reference guide
Hide thumbs Also See for SR2016T-NA:
Table of Contents

Advertisement

show cable arp-filter
Table 3-2
Field
Requests Forwarded
Total
Unfiltered
Filtered
Note
The Total counts in the show cable arp-filter command continue to increment, regardless of whether
Note
ARP filtering has been enabled. The Unfiltered and Filtered counts increment only when ARP filtering
has been enabled using the cable arp filter command. When cable ARP filtering is disabled, these
counters retain their current values until manually reset, using the clear counters command.
The following example shows how to display the devices that are generating or filtering more than 100
ARP requests per reporting period. Repeat the command to see how quickly the device is generating
ARP packets.
Router# show cable arp-filter c7/0/0 requests-filtered 100
Sid
MAC Address
1
0006.2854.72d7 50.3.81.4
Router# show cable arp-filter c7/0/0 requests-filtered 100
Sid
MAC Address
1
0006.2854.72d7 50.3.81.4
Router#
The following example shows how to display the devices that are generating or filtering more than 200
ARP replies per reporting period. Repeat the command to see how quickly the device is generating ARP
packets.
Router# show cable arp-filter c5/0/0 replies-filtered 200
Sid
MAC Address
2
0006.53b6.562f 50.3.81.6
Router# show cable arp-filter c5/0/0 replies-filtered 200
Sid
MAC Address
2
0006.53b6.562f 50.3.81.6
Router#
Cisco Broadband Cable Command Reference Guide
3-8
show cable arp-filter Field Descriptions (continued)
Description
Total number of ARP request packets that the cable interface was asked to
forward to the ARP proxy since power-on.
Number of ARP request packets that the cable interface sent to the ARP
proxy while filtering was enabled using the cable arp filter request-send
command.
Number of ARP request packets for the ARP proxy that the cable interface
dropped, because they would have otherwise exceeded the allowable
threshold value that was configured for the interface using the cable arp
filter request-send command.
All counters are 16-bit counters, with a maximum value of 65,535 packets. If the number of
packets exceeds this amount, the counter wraps back to zero and begins incrementing again.
IP Address
IP Address
IP Address
IP Address
Req-Filtered
Req-For-IP-Filtered
12407
0
Req-Filtered
Req-For-IP-Filtered
14597
0
Req-Filtered
Req-For-IP-Filtered
0
0
Req-Filtered
Req-For-IP-Filtered
0
0
Chapter 3
Cisco CMTS Show Commands
Rep-Filtered
0
Rep-Filtered
0
Rep-Filtered
2358
Rep-Filtered
4016
OL-1581-08

Advertisement

Table of Contents
loading

This manual is also suitable for:

Broadband cable

Table of Contents