Table of Contents
Advertisement
Chapter 3
Cisco CMTS Show Commands
show cable tech-support
To display general information about the router when reporting a problem, use the show cable tech-
support command in privileged EXEC mode.
Syntax Description
cable slot/port
cable slot/subslot/port
Syntax Description
slot/port
slot/subslot/port
Defaults
No default behavior or values
Command Modes
Privileged EXEC
OL-1581-08
show cable tech-support [cable slot/port | cable slot/subslot/port] {slot/port | slot/subslot/port}
(Optional) Cisco IOS Release 12.3(9a)BC allows you to display
information about one specific cable interface.
Identifies the cable interface and downstream port on the Cisco uBR7100
series and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On the
Cisco uBR7200 series router, slot can range from 3 to 6, and port can be 0
or 1, depending on the cable interface.
(Optional) Cisco IOS Release 12.3(9a)BC allows you to display
information about one specific cable interface.
Identifies the cable interface on the Cisco uBR10012 router. The following
are the valid values:
•
•
•
(Optional) Displays information only for the specified cable interface
on the Cisco uBR7100 series and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On the
Cisco uBR7200 series router, slot can range from 3 to 6, and port can
be 0 or 1, depending on the cable interface.
(Optional) Displays information only for the specified cable interface
on the Cisco uBR10012 router. The following are the valid values:
•
slot = 5 to 8
subslot = 0 or 1
•
port = 0 to 4 (depending on the cable interface)
•
slot = 5 to 8
subslot = 0 or 1
port = 0 to 4 (depending on the cable interface)
Cisco Broadband Cable Command Reference Guide
show cable tech-support
3-161
Advertisement
Table of Contents
