Cisco SR2016T-NA Reference Manual page 1035

Reference guide
Hide thumbs Also See for SR2016T-NA:
Table of Contents

Advertisement

Chapter 6
Cable CPE Commands
crypto ipsec client ezvpn (interface configuration)
To assign a Cisco Easy VPN Remote configuration to an interface, specify whether that interface is
outside or inside, and configure multiple outside and inside interfaces, use the crypto ipsec client ezvpn
command in interface configuration mode. To remove the Cisco Easy VPN Remote configuration from
the interface, use the no form of this command.
A separate crypto ipsec client ezvpn command exists in global configuration mode that creates a
Note
Cisco Easy VPN Remote configuration.
Syntax Description
name
outside
inside
Defaults
The default inside interface is the Ethernet interface on Cisco 800 series routers and Cisco uBR905 and
Cisco uBR925 cable access routers.
Command Modes
Interface configuration
Command History
Release
12.2(4)YA
12.2(8)YJ, 12.2(15)T
OL-1581-07
crypto ipsec client ezvpn name [outside | inside]
no crypto ipsec client ezvpn name [outside | inside]
Specifies the Cisco Easy VPN Remote configuration to be assigned to the
interface.
(Optional) Specifies the outside interface of the IPSec client router. This is
optional for outside interfaces. You can add up to four outside tunnels, one
tunnel per outside interface, for all platforms.
(Optional) Specifies the inside interface of the IPSec client router. The
Cisco 1700 series has no default inside interface and any inside interface
must be configured. The Cisco 800 series routers, and Cisco uBR905 and
Cisco uBR925 cable access routers have default inside interfaces. However,
you can configure any inside interface. You can add up to three inside
interfaces for all platforms.
Modification
This command was introduced on Cisco 806, Cisco 826, Cisco 827, and
Cisco 828 routers; Cisco 1700 series routers; and Cisco uBR905 and
Cisco uBR925 cable access routers.
This command was enhanced to enable you to configure multiple outside
and inside interfaces for Cisco 806, Cisco 826, Cisco 827, and Cisco 828
routers; Cisco 1700 series routers; and Cisco uBR905 and Cisco uBR925
cable access routers.
crypto ipsec client ezvpn (interface configuration)
Cisco Broadband Cable Command Reference Guide
6-33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Broadband cable

Table of Contents