Cisco SR2016T-NA Reference Manual page 957

Chapter 5 Cisco CMTS Debugging Commands
debug hccp authentication
To display authentication debug messages for HCCP groups, use the debug hccp authentication
command in privileged EXEC mode. To disable HCCP authentication debug message output, use the no
form of this command.
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC
Command History Release
12.1(3a)EC
12.2(4)XF1,
12.2(4)BC1
12.2(11)BC1
Usage Guidelines
You must use the
generate any debug message output.
Examples The following example shows the additional 1+1 redundancy authentication debug message output
produced when the debug hccp authentication command has been activated:
Router# debug hccp events
Router# debug hccp authentication
Sep
Sep
Related Commands Command
debug hccp
channel-switch
debug hccp events
debug hccp inter-db
debug hccp plane
OL-1581-08
debug hccp authentication
no debug hccp authentication
Modification
This command was introduced.
Support was added for the N+1 (1:n) RF Switch with the Cisco uBR10012
router.
Support was added for the N+1 (1:n) RF Switch with the
Cisco uBR7246VXR router.
debug hccp events
7 09:51:50.151:HCCP 1 0->1:HELLO Learn tran 31708
7 09:51:50.151:auth md5 keyid 1 digest B77F65ED 1B38ED5C 87A7037B C006DAFB
Description
Displays debug messages related to an RF or channel switch that is being
used for HCCP N+1 (1:n) redundancy.
Displays debug messages for all HCCP group interaction.
Displays debug messages for the inter-database events during HCCP
operations.
Displays debug messages for HCCP-related messages sent between the
router's control plane and data backplane.
command before the debug hccp authentication command will
Cisco Broadband Cable Command Reference Guide
debug hccp authentication
5-97