Cisco SR2016T-NA Reference Manual page 805

Chapter 4 Commands for the Cisco uBR10012 Router
show cr10k-rp
To display packet processing information for a particular service ID (SID) on a cable interface, use the
show cr10k-rp command in user EXEC or privileged EXEC mode.
Syntax Description
cable x/y/z
sid
classifier
mac-rw-index
queue
service-flow ds
service-flow us
Defaults No default behavior or values.
Command Modes User EXEC, Privileged EXEC
Command History Release
12.2(15)BC1
Usage Guidelines The show cr10k-rp command displays information that the PRE remote processor (RP) module has
about a particular SID. This information includes configuration information about the SID, as well as
internal status information that is useful only to Cisco engineers in troubleshooting problems.
Examples The following example shows typical output for the show cr10k-rp classifier command for a SID that
identifies a cable modem:
Router# show cr10k-rp c6/1/0 2 classifier
Mac Rw Index: 5CCB Index: 7
CM Classifiers:
id=4, sfid=14 CFR Index 16396 RP sfindex 16396,
prio=10, sip=0.0.0.0, sip mask=0.0.0.0
dip=0.0.0.0, dip mask=0.0.0.0, prot=17, tos=A0,E0
sport = 0,750, dport = 1024,10000 matches = 0
id=2, sfid=13 CFR Index 16395 RP sfindex 16395,
OL-1581-08
show cr10k-rp cable x/y/z sid {classifier | mac-rw-index | queue | service-flow ds |
service-flow us}
Identifies the cable interface for which information should be displayed.
Identifies the service ID (SID) for which information should be displayed.
The valid range is 1 to 8191.
Displays classifier information for the SID.
Displays the MAC-layer read/write index for the SID.
Displays information about the versatile traffic management system
(VTMS) packet queues for the SID.
Displays the mapping of the downstream service-flow IDs (SFIDs) being
used on the processor card and cable interface line card for the SID.
Displays the mapping of the upstream service-flow ID (SFID) and service
ID (SID) for the SID.
Modification
This command was introduced for the Cisco uBR10012 router.
Cisco Broadband Cable Command Reference Guide
show cr10k-rp
4-45