Table of Contents
Advertisement
show dhcp
Table 6-29 show dhcp server Field Descriptions (continued)
Field
Requests
Acks
Naks
Declines
Releases
Bad
TFTP Server Name
TIME0
TIME1
Subnet
Tip
In Cisco IOS Release 12.2(8)T and later releases, you can add a timestamp to show commands using the
exec prompt timestamp command in line configuration mode.
Related Commands
Command
cable-modem voip best-effort
show bridge cable-modem
show interfaces cable-modem
Cisco Broadband Cable Command Reference Guide
6-164
Description
Number of requests for an IP address to the server.
Number of acknowledge messages sent by the server to the proxy client.
Number of not acknowledge messages sent by the server to the proxy client.
Number of offers from the server that have been declined by the proxy
client.
Number of times IP addresses have been relinquished gracefully by the
client.
Number of bad packets received due to wrong length, wrong field type, or
other causes.
Name (if any) configured for the server providing TFTP downloads to the
CM.
IP address of the primary Time-of-Day (ToD) server.
IP address of the secondary ToD server.
Subnet containing the DHCP server.
Description
Allows voice calls to be sent upstream over the cable interface using
best effort.
Displays bridging information for the cable interface.
Displays information about the cable interface.
Chapter 6
Cable CPE Commands
OL-1581-07
Advertisement
Table of Contents
