Table of Contents
Advertisement
snmp-server enable traps docsis-cm
snmp-server enable traps docsis-cm
To enable one or more Simple Network Management Protocol (SNMP) traps for DOCSIS 1.1 events, use
the snmp-server enable traps docsis-cm command in global configuration mode. To disable the SNMP
traps, use the no form of this command.
Cisco uBR905 and Cisco uBR925 cable access routers, and Cisco CVA122 Cable Voice Adapter
Syntax Description
bpi
bpkm
dccack
dccreq
dccrsp
dhcp
dsack
dsreq
dsrsp
dynsa
swupcvc
swupfail
swupinit
swupsucc
tlv
Defaults
No traps are enabled. If no options are specified, all DOCSIS-related traps are enabled.
Command Modes
Global configuration
Command History
Release
12.2(15)CZ
Cisco Broadband Cable Command Reference Guide
6-180
snmp-server enable traps docsis-cm [bpi | bpkm | dccack | dccreq | dccrsp | dhcp | dsack | dsreq
| dsrsp | dynsa | swupcvc | swupfail | swupinit | swupsucc | tlv]
no snmp-server enable traps docsis-cm [bpi | bpkm | dccack | dccreq | dccrsp | dhcp | dsack |
dsreq | dsrsp | dynsa | swupcvc | swupfail | swupinit | swupsucc | tlv]
(Optional) Enables Baseline Privacy Interface (BPI) initialization failure
traps.
(Optional) Enables Baseline Privacy Key Management (BPKM)
initialization failure traps.
(Optional) Enables dynamic channel change acknowledgement failure
traps.
(Optional) Enables dynamic channel change request failure traps.
(Optional) Enables dynamic channel change response failure traps.
(Optional) Enables DHCP failure traps.
(Optional) Enables dynamic service acknowledgement failure traps.
(Optional) Enables dynamic service request failure traps.
(Optional) Enables dynamic service response failure traps.
(Optional) Enables dynamic SA failure traps.
(Optional) Enables secure software upgrade code verification certificate
(CVC) failure traps.
(Optional) Enables secure software upgrade failure traps.
(Optional) Enables secure software upgrade initialization failure traps.
(Optional) Enables secure software upgrade success traps.
(Optional) Enables unknown Type/Length/Value (TLV) traps.
Modification
This command was introduced on the Cisco uBR905 and Cisco uBR925
cable access routers, and the Cisco CVA122 Cable Voice Adapter.
Chapter 6
Cable CPE Commands
OL-1581-07
Advertisement
Table of Contents
