Cisco SR2016T-NA Reference Manual page 710

Reference guide
Hide thumbs Also See for SR2016T-NA:
Table of Contents

Advertisement

show interface cable mac-scheduler
show interface cable mac-scheduler
To display the current time-slot scheduling state and statistics, use the show interface cable mac-
scheduler command in privileged EXEC mode.
In previous releases, information for the MAC scheduler was displayed using the
Note
and
information is moved to this command.
Syntax Description
slot/port
slot/subslot/port
n
Defaults
If no upstream port is identified, displays information for all upstreams on the specified cable interface.
Command Modes
Privileged EXEC
Command History
Release
12.1(4)CX
12.2(4)BC1
12.2(15)CX
12.2(15)BC2
Cisco Broadband Cable Command Reference Guide
3-214
show interface cable {slot/port | slot/subslot/port} mac-scheduler [n]
show interface cable upstream
Identifies the cable interface and downstream port on the Cisco uBR7100
series and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On the
Cisco uBR7200 series router, slot can range from 3 to 6, and port can be 0
or 1, depending on the cable interface.
Identifies the cable interface on the Cisco uBR10012 router. The following
are the valid values:
(Optional) Displays information for the indicated upstream port. Valid
values start with 0 for the first upstream port on the cable interface line card.
Modification
This command was introduced. (Much of the information shown in this
command was previously shown by the
interface cable upstream
Support was added to the Cisco IOS Release 12.2 BC train.
Support was added for the Cisco uBR-MC28U/X cable interface line card,
including additional information about DOCSIS 2.0 A-TDMA and mixed
modulation profiles.
Additional information was added to the display for DOCSIS 2.0 A-TDMA
and mixed modulation profiles on the Cisco uBR-MC5X20S cable interface
line card.
commands. In Cisco IOS Release 12.2 BC, the MAC scheduler
slot = 5 to 8
subslot = 0 or 1
port = 0 to 4 (depending on the cable interface)
commands.)
Chapter 3
Cisco CMTS Show Commands
show interface cable
show interface cable
and
show
OL-1581-08

Advertisement

Table of Contents
loading

This manual is also suitable for:

Broadband cable

Table of Contents