Table of Contents
Advertisement
show controllers cable-modem filters
In Cisco IOS Release 12.2(8)T and later releases, you can add a timestamp to show commands using the
Tip
exec prompt timestamp command in line configuration mode.
Related Commands
Command
show controllers cable-modem
show controllers cable-modem
bpkm
show controllers cable-modem
crypto des
show controllers cable-modem
lookup-table
show controllers cable-modem
mac
show controllers cable-modem
phy
show controllers cable-modem
tuner
Cisco Broadband Cable Command Reference Guide
6-92
Description
Displays high-level controller information about the cable interface.
Displays information about the baseline privacy key management
exchange between the cable interface and the CMTS.
Displays information about the Data Encryption Standard (DES)
engine registers.
Displays the mini-slot lookup table for the cable interface.
Displays detailed MAC-layer information for the cable interface.
Displays the contents of the registers used in the downstream
physical hardware for the cable interface.
Displays the settings for the upstream and downstream tuners used
for the cable interface.
Chapter 6
Cable CPE Commands
OL-1581-07
Advertisement
Table of Contents
