Show Interface Cable Sid - Cisco SR2016T-NA Reference Manual

Reference guide
Hide thumbs Also See for SR2016T-NA:
Table of Contents

Advertisement

show interface cable sid

show interface cable sid
To display the service identifier (SID) information for a CM, use the show interface cable sid command
in privileged EXEC mode.
Syntax Description
slot/port
slot/subslot/port
association
connectivity
counters
qos
secondary-ip
verbose
Command Modes
Privileged EXEC
Command History
Release
11.3 XA
11.3(6)NA
12.0(4)XI
12.0(5)T
12.0(7)XR and 12.0(7)T The verbose keyword was added to display additional information for the
Cisco Broadband Cable Command Reference Guide
3-234
show interface cable {slot/port | slot/subslot/port} sid [association | counters | qos | secondary-ip]
[verbose]
Identifies the cable interface and downstream port on the Cisco uBR7100
series and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On the
Cisco uBR7200 series router, slot can range from 3 to 6, and port can be 0 or
1, depending on the cable interface.
Identifies the cable interface on the Cisco uBR10012 router. The following
are the valid values:
slot = 5 to 8
subslot = 0 or 1
port = 0 to 4 (depending on the cable interface)
Displays the virtual interfaces (VRF) or Interface Descriptor Blocks (IDBs).
Displays the values of the per-SID connectivity statistics. (This option
appears only in DOCSIS 1.0 and 1.0+ releases. Use the
connectivity
Displays the values of the per-SID usage counters. Same as the keyword stats
that appeared in Cisco IOS Release 11.3(5)NA and earlier releases.
Displays the QoS characteristics received by each SID.
Displays the secondary IP addresses associated with each SID.
Displays detailed information for the counters and qos options.
Note
Modification
This command was introduced.
The keyword stats was changed to counters.
The primary SID information was added.
The command output was modified to identify secondary SIDs.
counters option.
command in DOCSIS 1.1 releases.)
The verbose option is supported by itself or with any of the other
options, but it displays additional information only for the counters
and qos options.
Chapter 3
Cisco CMTS Show Commands
show cable modem
OL-1581-08

Advertisement

Table of Contents
loading

This manual is also suitable for:

Broadband cable

Table of Contents