Table of Contents
Advertisement
show packetcable gate
Table 3-63 show packetcable gate Field Display (continued)
Field
State
SFID (us)
SFID (ds)
Total number of gates
Total Gates committed
For complete information about the State field, see section 5.4, Gate Control Protocol Operation, in the
Tip
PacketCable Dynamic Quality-of-Service Specification
Related Commands
Command
clear packetcable gate
counter commit
packetcable
show packetcable gate
counter commit
show packetcable
global
Cisco Broadband Cable Command Reference Guide
3-254
Description
Describes the current state of the gate in both the upstream and downstream
directions. The possible state values are:
ALLOC = The CMTS has received a Gate-Alloc command from the gate
•
controller and has created the gate in response. The CMTS must now
wait for the request to be authorized.
AUTH = The CMTS has received a Gate-Set command from the gate
•
controller that authorizes the resources needed for the gate request. The
CMTS must now wait for the actual resources to be reserved.
RSVD = All required resources for the gate have been reserved.
•
COMMIT = All resources have been committed at both the local CMTS
•
and remote CMTS. The local CMTS has also received a commit
notification from the local MTA and has finished all gate coordination
with the remote end. The gate can now pass traffic.
•
INVLD = The gate is invalid, typically because of an error condition or
lack of resources. The CMTS will eventually delete the gate.
•
UNKWN = The gate is an unknown state.
SFID for the upstream associated with this PacketCable gate.
SFID for the downstream associated with this PacketCable gate.
Displays the total number of gates that are currently allocated, authorized,
reserved, or committed.
Displays the total number of gates that the CMTS has committed since the
CMTS was last reset or since the counters were last cleared.
Description
Resets the counters that track the total number of committed gates.
Enables PacketCable operations on the Cisco CMTS.
Displays the total number of committed gates since system reset or since the
counter was last cleared.
Displays the current PacketCable configuration.
Chapter 3
Cisco CMTS Show Commands
(PKT-SP-DQOS-I03-020116).
OL-1581-08
Advertisement
Table of Contents
