Table of Contents
Advertisement
show crypto engine connections
Related Commands
Command
clear crypto engine accelerator
counter
crypto ca
crypto cisco
crypto dynamic-map
crypto engine accelerator
crypto ipsec
crypto isakmp
crypto key
crypto map
debug crypto engine
accelerator control
debug crypto engine
accelerator packet
show crypto engine accelerator
ring
show crypto engine accelerator
sa-database
show crypto engine accelerator
statistic
show crypto engine brief
show crypto engine
configuration
For information about these additional commands, see the IP Security and Encryption section in the
Note
Cisco IOS Security Command Reference.
Cisco Broadband Cable Command Reference Guide
6-158
Description
Resets the statistical and error counters for the hardware accelerator
to zero.
Defines the parameters for the certification authority used for a
session.
Defines the encryption algorithms and other parameters for a
session.
Creates a dynamic map crypto configuration for a session.
Enables the use of the Cisco uBR905 and Cisco uBR925 router's
onboard hardware accelerator for IPSec encryption.
Defines the IPSec security associations and transformation sets.
Enables and defines the IKE protocol and its parameters.
Generates and exchanges keys for a cryptographic session.
Creates and modifies a crypto map for a session.
Displays each control command as it is given to the crypto engine.
Displays information about each packet sent for encryption and
decryption.
Displays the contents of command and transmit rings for the crypto
engine.
Displays the active (in-use) entries in the crypto engine security
association (SA) database.
Displays the current run-time statistics and error counters for the
crypto engine.
Displays a summary of the configuration information for the crypto
engine.
Displays the version and configuration information for the crypto
engine.
Chapter 6
Cable CPE Commands
OL-1581-07
Advertisement
Table of Contents
