Table of Contents
Advertisement
Chapter 3
Cisco CMTS Show Commands
5
Router#
The following example shows typical output for the sort-byte-count option for the show cable
subscriber-usage command:
Router# show cable subscriber-usage sort-byte-count
Sfid Mac Address
7
9
5
Router#
Table 3-42
Table 3-42 show cable subscriber-usage Field Descriptions
Field
SFID
Mac Address
Enforce-rule Name
Total Kbyte count
Last-detect Time
Last-penalty Time
Penalty Flag
Related Commands
Command
activate-rule at-byte-
count
cable qos enforce-rule
enabled
enforced qos-profile
monitoring-duration
penalty-period
OL-1581-08
0007.0e03.2c25 test1
Enforce-rule Total-Kbyte
Name
0007.0e03.2cad test1
0007.0e03.2c45 test1
0007.0e03.2c25 test1
describes the fields shown by the show cable subscriber-usage command.
Description
Specifies the number of bytes that a subscriber can transmit during the
monitoring period.
Creates an enforce-rule to be used to enforce a particular quality of service
(QoS) profile and enters enforce-rule configuration mode.
Activates an enforce-rule and begins subscriber traffic management.
Specifies the quality of service (QoS) profile that should be enforced when
users violate their assigned QoS profiles.
Specifies the time period and sample rate to be used for monitoring
subscribers.
Specifies the time period that an enforced quality of service (QoS) profile
should be used for subscribers that violate their registered QoS profile.
0
Jan1
00:00:00
Last-detect
Count
time
65157114
Feb24 11:36:34
16381014
13440960
Description
Number of the Service Flow ID.
Hardware address (MAC address) of the subscriber's cable modem.
Name of the enforce-rule being applied to this subscriber.
Total number of kilobytes consumed by the subscriber's cable
modem during the last monitoring-duration window.
The total byte count is reset to 0 whenever an enforce-rule's
Note
configuration is changed.
Last time period, if any, at which it was determined that the cable
modem was using more bandwidth than allowed by their QoS
profile. This value also shows the time at which the enforced QoS
profile was automatically applied, if this option has been enabled.
If an enforced QoS profile is currently in effect, this field shows the
time period at which the subscriber's current penalty time expires,
at which point their original registered QoS profile is restored.
Identifies whether a penalty enforce-rule has been applied to this
cable modem.
Cisco Broadband Cable Command Reference Guide
show cable subscriber-usage
Jan1
00:00:00
-
Last-penalty
Pen
time
Flag
Mar3
11:36:34
Act
-
-
3-159
Advertisement
Table of Contents
