Table of Contents
Advertisement
show cable modem counters
show cable modem counters
To display downstream and upstream traffic counters for one or more CMs, use the show cable modem
counters command in privileged EXEC mode.
Syntax Description
ip-address
mac-address
cable slot/port
cable slot/subslot/port
upstream port
Defaults
Displays counter information for all CMs.
Command Modes
Privileged EXEC
Command History
Release
12.1(4)CX and
12.2(4)BC1
Cisco Broadband Cable Command Reference Guide
3-78
show cable modem [ip-address | mac-address] counters
show cable modem cable slot/port [upstream port] counters
show cable modem cable slot/subslot/port [upstream port] counters
(Optional) Displays counter information for the CM with the specified IP
address.
(Optional) Displays counter information for the CM with the specified
MAC address.
(Optional) Displays counter information for all CMs on the specified cable
interface and downstream port on the Cisco uBR7100 series and
Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On the
Cisco uBR7200 series router, slot can range from 3 to 6, and port can be 0
or 1, depending on the cable interface.
(Optional) Displays counter information for all CMs on the specified cable
interface on the Cisco uBR10012 router. The following are the valid values:
•
•
•
(Optional) Displays information for all CMs using this specific upstream.
You can specify this option only when displaying information for a cable
interface. The valid range for port begins with 0 and ends with a value that
depends on the number of upstream ports on the cable interface line card.
Modification
This command was introduced.
slot = 5 to 8
subslot = 0 or 1
port = 0 to 4 (depending on the cable interface)
Chapter 3
Cisco CMTS Show Commands
OL-1581-08
Advertisement
Table of Contents
