Table of Contents
Advertisement
Chapter 4
Commands for the Cisco uBR10012 Router
The following example shows the Cisco uBR10012 OC-48 DPT line cards in slots 3 and 4 being
reconfigured from POS operation to SRP operation:
Router# no hw-module slot 3 pos
Router# no hw-module slot 4 pos
Router# hw-module slot 3 srp
Router# card 3/0 1oc48dpt/pos-1
Router# card 4/0 1oc48dpt/pos-1
Related Commands
Command
hw-module reset
hw-module shutdown
hw-module slot pos
OL-1581-08
Description
Resets a PRE1 module or line card.
Shuts down a PRE1 module or line card.
Configures a line card slot for POS operation.
Cisco Broadband Cable Command Reference Guide
hw-module slot srp
4-27
Advertisement
Table of Contents
