Table of Contents
Advertisement
dev
dev
To list the known storage and memory devices for the router, use the dev command in ROM monitor
mode.
Syntax Description
This command has no arguments or keywords.
Defaults
No default behavior or values.
Command Modes
ROM monitor
Command History
Release
11.3 NA
12.1(5)EC
12.2(4)BC1
Examples
The following example shows how to display the known file systems on a router:
rommon 3 > dev
Devices in device table:
bootflash:
rommon 4 >
The disk2 device is available only on a Cisco uBR7246VXR router using the NPE-G1 processor card.
Note
Related Commands
Command
dir
Cisco Broadband Cable Command Reference Guide
A-22
dev
Modification
This command was introduced on Cisco uBR7200 series routers.
Support was added for Cisco uBR7100 series routers.
Support was added for the Cisco uBR10012 router. Changes were also made
to the boot procedure after breaking into ROMMON to ensure that all
hardware and software registers are in a known state before loading the new
image.
id
name
boot flash
slot0:
PCMCIA slot 0
slot1:
PCMCIA slot 1
disk0:
PCMCIA slot 0
disk1:
PCMCIA slot 1
disk2:
PCMCIA slot 2
eprom:
eprom
Description
Lists the files on one of the router's file systems.
Appendix A
Using the ROM Monitor
OL-1581-07
Advertisement
Table of Contents
