Table of Contents
Advertisement
Chapter 3
Cisco CMTS Show Commands
Router#
The following example shows a typical display for the show packetcable event rks-group command.
Router# show packetcable event rks-group
Pri-addr
1.9.62.12
Router#
Table 3-62
Table 3-62 show packetcable event rks-group Field Display
Field
Pri-addr
Pri-port
Sec-addr
Sec-port
Ref-cnt
Batch-cnt
For complete information about PacketCable event messaging, see the
Tip
Specification, which is available at the PacketCable web site at the following URL:
http://www.packetcable.com
Related Commands
Command
clear packetcable gate
counter commit
packetcable
show packetcable gate
counter commit
show packetcable
global
OL-1581-08
Pri-port Sec-addr
1813
1.9.62.20
describes the major fields shown in the show packetcable event rks-group display.
Description
IP address for the primary RKS server.
UDP port for the primary RKS server.
IP address for the secondary RKS server.
UDP port for the secondary RKS server.
Number of times that the router send single event messages to the RKS
server.
Number of times that the router sent batrch messages (multiple Event
Messages within a single RADIUS message) to the RKS server.
Description
Resets the counters that track the total number of committed gates.
Enables PacketCable operations on the Cisco CMTS.
Displays the total number of committed gates since system reset or since the
counter was last cleared.
Displays the current PacketCable configuration.
Sec-port Ref-cnt Batch-cnt
1813
2
Cisco Broadband Cable Command Reference Guide
show packetcable event
0
PacketCable Event Messages
3-251
Advertisement
Table of Contents
