Cisco SR2016T-NA Reference Manual page 513

Chapter 3 Cisco CMTS Show Commands
show cable device access-group
To display a list of CMs and their customer premises equipment (CPE) devices, along with their access
groups, use the show cable device access group command in privileged EXEC mode.
The show cable device access-group command is not supported on the Cisco uBR10012 universal
Note
broadband router.
Syntax Description ip-addr
Command Modes Privileged EXEC
Command History Release
11.NA
12.1(3a)EC1
12.2(4)BC1
Usage Guidelines
This command displays information about both CMs and their associated CPE devices. To display
information only for hosts and other CPE devices, use the
display information only for CMs, use the
If an SNMP manager is requesting information about CM or CPE devices at the same time that this
command is given, the command displays the following error message:
No information is available, please try later.
Wait until the SNMP retrieval is done and retry the CLI command.
Examples
The following example shows how to display a list of the CMs and their hosts:
Router# show cable device access-group
MAC address
00d0.ba77.7595
0020.4065.828c
0080.c6f9.b42e
0020.7806.defe
0020.4066.5c5c
0050.baa0.5ccd
0020.4070.56d8
0050.046f.f4cf
0020.40b4.0c80
OL-1581-08
show cable device [ip-address] access-group
(Optional) Specifies the IP address for a particular CM or host.
Modification
This command was introduced.
Support was added to the Release 12.1 EC train.
Support was added to the Release 12.2 BC train for the Cisco uBR7100
series and Cisco uBR7200 series routers. (This command might appear in
the CLI for the Cisco uBR10012 router but is not functional.)
IP address
10.20.114.34
10.27.29.128
24.168.220.52
192.168.28.134
10.27.33.128
24.168.223.251
10.27.29.129
192.168.33.25
10.27.33.129
show cable host access-group
show cable modem access-group
Type Access-group
modem resident
modem resident
host
host
modem resident
host
modem resident
host
modem resident
Cisco Broadband Cable Command Reference Guide
show cable device access-group
command. To
command.
3-17