Table of Contents
Advertisement
debug cable hw-spectrum
debug cable hw-spectrum
To display debug messages for spectrum management (frequency agility), use the debug cable
hw-spectrum command in privileged EXEC mode. To disable debugging output, use the no form of the
command.
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Release
11.3 NA
12.0(4)XI
Examples
The following shows how to enable debug cable hw-spectrum debugging.
Router# debug cable hw-spectrum
CMTS spectrum analyzer debugging is on
Router#
Related Commands
Command
debug cable specmgmt
Cisco Broadband Cable Command Reference Guide
5-38
debug cable hw-spectrum
no debug cable hw-spectrum
Modification
This command was introduced as
This command was enhanced and renamed to debug cable
hw-spectrum.
Description
Displays debugging output for the CMTS spectrum analyzer process.
Chapter 5
Cisco CMTS Debugging Commands
debug cable
specmgmt.
OL-1581-08
Advertisement
Table of Contents
