Cisco SR2016T-NA Reference Manual page 398

clear cable modem offline
clear cable modem offline
To remove offline CMs from the internal address and routing tables for a cable interface, or to clear all
flap list counters for offline CMs on a cable interface, use the clear cable modem offline command in
privileged EXEC mode.
Syntax Description cable slot/port
cable slot/subslot/port
counters
delete
Defaults
No default behavior or values
Command Modes Privileged EXEC
Command History Release
12.2(11)BC3
12.2(15)BC1
Examples The following example shows how to clear the counters for the offline CMs on a particular cable
interface:
Router# clear cable modem c3/0 offline counters
Router#
The following example shows how to delete all offline CMs from the router's internal tables for a
particular cable interface, and to remove them from the
Router# clear cable modem c3/0 offline delete
Cisco Broadband Cable Command Reference Guide
2-386
clear cable modem cable [slot/port] offline {counters | delete}
clear cable modem cable [slot/subslot/port] offline {counters | delete}
Modification
This command was introduced for the Cisco uBR7100 series,
Cisco uBR7200 series, and Cisco uBR10012 universal broadband routers.
The cable interface was made an optional keyword for this command.
(Optional) Identifies the a interface and downstream port on the
Cisco uBR7100 series and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On the
Cisco uBR7200 series router, slot can range from 3 to 6, and port can
be 0 or 1, depending on the cable interface.
(Optional) Identifies a cable interface on the Cisco uBR10012 router.
The following are the valid values:
slot = 5 to 8
•
subslot = 0 or 1
•
port = 0 to 4 (depending on the cable interface)
•
Clears the flap list counters for all CMs that are currently offline.
Removes all CMs that are currently offline from the router's internal
tables. The show cable modem
CMs until they attempt to reregister with the CMTS.
show cable modem
Chapter 2 Cisco CMTS Configuration Commands
command will no longer display these
command displays:
OL-1581-08