Table of Contents
Advertisement
Appendix A
Using the ROM Monitor
dir
To list the files on one of the router's file systems, use the dir command in ROM monitor mode.
Syntax Description
device:
Defaults
No default behavior or values.
Command Modes
ROM monitor
Command History
Release
11.3 NA
12.1(5)EC
12.2(4)BC1
Examples
The following example shows how to list the files on the slot0: and bootflash: devices.
rommon 40 > dir slot0:
2229799 bytes (0x220627)
rommon 41 > dir bootflash:
1378560 bytes (0x150900)
rommon 42 >
Related Commands
Command
dev
OL-1581-07
dir device:
Specific device to be displayed.
Modification
This command was introduced on Cisco uBR7200 series routers.
Support was added for Cisco uBR7100 series routers.
Support was added for the Cisco uBR10012 router. Changes were also made
to the boot procedure after breaking into ROMMON to ensure that all
hardware and software registers are in a known state before loading the new
image.
File size
65 bytes (0x41)
File size
16220 bytes (0x3f5c)
76 bytes (0x4c)
189250 bytes (0x2e342)
Description
Lists the known storage and memory devices for the router.
Checksum
File name
0xb49d
basic.cm
0x469e
uBR7200-k.z
Checksum
File name
0x6607c732
ubr7200-kboot-mz.122.11.BC3
0x47e9a02c
bundle.cfg
0x313b6bb0
config.cm
0xe95da48e
crashinfo_20030515-212829
Cisco Broadband Cable Command Reference Guide
dir
A-23
Advertisement
Table of Contents
