Table of Contents
Advertisement
Chapter 2
Cisco CMTS Configuration Commands
cable telco-return spd dial-
timer
cable telco-return spd
factory-default
cable telco-return spd
manual-dial
cable telco-return spd
password
cable telco-return spd
phonenum
cable telco-return spd ppp-
authenticate
cable telco-return spd
radius-realm
cable telco-return spd
service-provider
cable telco-return spd
threshold
cable telco-return spd
username
OL-1581-08
Sets the number of seconds that a telephone connection is idle before
the telco-return CM disconnects the call.
Indicates the service provider descriptor (SPD) that the telco-return
CM uses during the initialization process.
Enables the telco-return CM to operate in manual-dial mode.
Sets the password that the telco-return CM uses for authentication
when establishing a PPP connection.
Sets the telephone numbers that the telco-return CM dials when
connecting to the headend's network access server.
Selects the authentication procedure to use when the telco-return CM
is establishing a PPP connection.
Selects a RADIUS server domain to use for the login response string.
Includes the service provider name in the SPD.
Sets the number of failed dial-up connections that can occur before the
CM indicates a connection failure.
Sets the username that the telco-return CM uses for authentication
when establishing a PPP connection.
Cisco Broadband Cable Command Reference Guide
cable telco-return registration-ip
2-255
Advertisement
Table of Contents
