Table 131: Show Ip Dhcp-Local Limits Output Fields; Monitoring The Maximum Number Of Available Leases - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

JUNOSe 11.0.x Broadband Access Configuration Guide
Related Topics

Monitoring the Maximum Number of Available Leases

Display the maximum number of leases available for each VPI/VCI, VLAN, Ethernet
Purpose
subnetwork, or POS access interface type, or for a specific interface or subinterface.
To display the maximum number of leases available for each interface type:
Action
host1(config)#show ip dhcp-local limits
*****************************************
ATM Limit
VLAN Limit
POS Limit
Ethernet Limit - 48000
To display information about the maximum number of leases for a specific interface:
host1(config)#show ip dhcp-local limits interface atm 3/1
Interface
---------
atm 3/1
To display information about the maximum number of leases on all interfaces:
host1(config)#show ip dhcp-local limits interface
Interface
---------
fastEthernet0/0
atm 3/1
atm 4/2
atm 5/1
pos 2/1
Table 131 on page 572 lists the show ip dhcp-local limits command output fields.
Meaning

Table 131: show ip dhcp-local limits Output Fields

572
Monitoring the Maximum Number of Available Leases
show ip dhcp-local duplicate-clients
DHCP Local Server Address Limits
- 48000
- 48000
- 1000
Dhcp Local Interface Limits
---------------------------
Limit Count
----- -----
300 127
Dhcp Local Interface Limits
---------------------------
Limit Count
----- -----
200 0
300 127
5000 0
5000 15
1000 0
Field Name
ATM Limit
VLAN Limit
POS Limit
Total
Denied Denied
------ ------
5 29
Total
Denied Denied
------ ------
0 0
5 29
0 0
2 5
0 0
Field Description
Number of leases available for each VPI/VCI
Number of leases available for each VLAN
Number of leases available for each POS access
interface