Monitoring The Maximum Number Of Available Leases; Table 130: Show Ip Dhcp-Local Duplicate-Clients Output Fields - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

JunosE 11.2.x Broadband Access Configuration Guide
Related Topics

Monitoring the Maximum Number of Available Leases

Purpose
Action
Meaning
562

Table 130: show ip dhcp-local duplicate-clients Output Fields

Field Name
MAC
Interface
Count
Time
show ip dhcp-local duplicate-clients
Display the maximum number of leases available for each VPI/VCI, VLAN, Ethernet
subnetwork, or POS access interface type, or for a specific interface or subinterface.
To display the maximum number of leases available for each interface type:
host1(config)#show ip dhcp-local limits
*****************************************
DHCP Local Server Address Limits
ATM Limit - 48000
VLAN Limit - 48000
POS Limit - 1000
Ethernet Limit - 48000
To display information about the maximum number of leases for a specific interface:
host1(config)#show ip dhcp-local limits interface atm 3/1
Dhcp Local Interface Limits
---------------------------
Interface Limit Count
--------- ----- -----
atm 3/1 300 127
To display information about the maximum number of leases on all interfaces:
host1(config)#show ip dhcp-local limits interface
Dhcp Local Interface Limits
---------------------------
Interface Limit
--------- -----
fastEthernet0/0 200
atm 3/1 300
atm 4/2 5000
atm 5/1 5000
pos 2/1 1000
Table 131 on page 563 lists the show ip dhcp-local limits command output fields.
Field Description
Duplicate MAC address
Interfaces used by the duplicate MAC address
Number of times the duplicate MAC address has been detected
Date and time the first duplication was detected
Total
Denied Denied
------ ------
5 29
Total
Count Denied Denied
----- ------ ------
0 0 0
127 5 29
0 0 0
15 2 5
0 0 0
Copyright © 2010, Juniper Networks, Inc.