Monitoring Dhcp External Server Configuration Information; Table 110: Show Ip Dhcp-External Configuration Output Fields - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

JunosE 11.2.x Broadband Access Configuration Guide
Related Topics

Monitoring DHCP External Server Configuration Information

Purpose
Action
Meaning
538
Table 109: show ip dhcp-local binding Output Fields (continued)
Field Name
Hardware
Lease
Interface
State
show ip dhcp-local binding
Display information about the router's DHCP external server application.
To display DHCP external server information:
host1#show ip dhcp-external configuration
Dhcp External : Enabled
Auto-Configure : Enabled
Server-Sync : Enabled
Disregard-Giaddr-Next-Hop : Enabled
Detect-Agent-Circuit-Id : Disabled
Recreate-Subscriber-Interface : Enabled
Duplicate-MAC-Address : Enabled
Servers:
-----------
10.1.1.1
10.2.1.1
10.3.1.1
Table 110 on page 538 lists the show ip dhcp-external configuration command output
fields.

Table 110: show ip dhcp-external configuration Output Fields

Field Name
Dhcp External
Auto-Configure
Server-Sync
Disregard-Giaddr-Next-hop
Detect-Agent-Circuit-Id
Field Description
MAC address of subscriber's computer
Infinite, or the number of seconds in which the IP address is available;
grace period is shown in parentheses for clients in a grace period
Interface whose statistics are reported
Binding state; expired or released state for clients currently in the
grace period
Field Description
Enabled or disabled
Enabled or disabled
Enabled or disabled
Enabled or disabled
Enabled or disabled
Copyright © 2010, Juniper Networks, Inc.