Table of Contents
Advertisement
M-series and MX-series Devices
294
Table 152: Fast Reroute Configuration Details (continued)
Task
Control exclusion of
administrative groups.
Control inclusion of
administrative groups.
Control inclusion of
administrative groups.
Adding LSP-Related Routes to the inet.3 Routing Table (NSM Procedure)
By default, a host route toward the egress router is installed in the inet.3 routing table.
Installing the host route allows BGP to perform next-hop resolution. It also prevents the
host route from interfering with prefixes learned from dynamic routing protocols and
stored in the inet.0 routing table.
To add additional routes into the inet.3 routing table in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Protocols > Mpls.
3.
Select Label Switched Path.
4.
Add or modify settings as specified in Table 153 on page 295.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Your Action
1.
Select one of the following:
exclude—Define the administrative groups to exclude for
fast reroute.
a.
Click Add new entry next to exclude.
b.
In the New exclude window, enter the names of one
or more groups.
no-exclude—Disable administrative group exclusion.
1.
Select one of the following:
include-all—Define the administrative groups that must all
be included for fast reroute.
a.
Click Add new entry next to include-all.
b.
In the New include-all window, enter the names of
one or more groups.
no-include-all—Disable administrative group inclusion.
1.
Select one of the following:
include-any—Define the administrative groups to include
for fast reroute.
a.
Click Add new entry next to include-any.
b.
In the New include-any window, enter the names of
one or more groups.
no-include-any—Disable administrative group inclusion.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
