Table 5: Show Environment Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SERVICE AVAILABILITY CONFIGURATION GUIDE 2010-10-08 Configuration Manual

Copyright © 2010, Juniper Networks, Inc.

Table 5: show environment Output Fields

Field Name
Chassis
fabric
fans
nvs
power
AC power
srp redundancy
slots: cards missing or offline.
line redundancy
fabric redundancy
temperature
Chapter 2: Managing Module Redundancy
Field Description
Number of slots, midplane identifier, and hardware
revision number:
14Slot—5Gbps, 14 slot midplane
midplaneId7Slot—5Gbps, 7 slot midplane
midplaneIdRx1400—10Gbps ASIC compatible, 12
line module slots, 2 SRP module slots for ERX14xx
models
midplaneIdRx700—10Gbps ASIC compatible, 5 line
module slots, 2 SRP module slots for ERX7xx
models
17Slot—100 or 320 Gbps, 17-slot midplane for the
E120 router
11Slot—320Gbps,
11-slot midplane for the E120 router
Capacity and hardware revision of the fabric.
Status of fans.
Status and capacity of NVS and amount of space
used.
Status of power feeds.
For ERX310 router only; status of power feeds.
Availability of a redundant SRP module
Status of each slot:
online
standby
offline
empty
Number of redundancy groups installed:
width—Number of slots the redundant midplane
covers
spare—Slot that contains a spare line module
primary—Slot that contains the primary line module
Status of redundancy on the switch fabric on the E120
and E320 routers. Possible values: ok and none.
Status of the system temperature
25