Complete Software Guide for Junos
show system services dhcp global
Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
616
®
OS for EX Series Ethernet Switches, Release 10.4
show system services dhcp global
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
(J Series routers and EX Series switches only) Display Dynamic Host Configuration
Protocol (DHCP) global configuration options. Global options apply to all scopes and
clients served by the DHCP server. Global options are overridden if specified otherwise
in scope or client options. Scope options apply to specific subnets or ranges of addresses.
Client options apply to specific clients.
This command has no options.
view and system
show system services dhcp global on page 617
Table 106 on page 616 describes the output fields for the
command. Output fields are listed in the approximate order in which they appear.
Table 106: show system services dhcp global Output Fields
Field Name
BOOTP lease length
Default lease time
Minimum lease time
Maximum lease time
DHCP options
Field Description
Length of lease time assigned to BOOTP clients.
Lease time assigned to clients that do not request a specific lease
time.
Minimum time a client retains an IP address lease on the server.
Maximum time a client can retain an IP address lease on the server.
User-defined options created for the DHCP server. If no options
have been defined, this field is blank.
show system services dhcp global
Copyright © 2010, Juniper Networks, Inc.