Configuring User Roles And Administrator Roles; Chapter 6 Configuring User Roles And Administrator Roles; Configuring Infranet Controller User Roles (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

CHAPTER 6
Configuring User Roles and Administrator
Roles

Configuring Infranet Controller User Roles (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
Configuring Infranet Controller User Roles (NSM Procedure) on page 35
Configuring Access Options on an Infranet Controller User Role (NSM
Procedure) on page 40
Configuring OAC Settings for a User Role (NSM Procedure) on page 42
Creating and Configuring Infranet Controller Administrator Roles (NSM
Procedure) on page 48
Delegating Management Tasks to Infranet Controller Administrator Roles (NSM
Procedure) on page 55
A user role defines user session parameters and personalization settings. You can
customize a user role by specifying access restrictions, enabling Host Enforcer (Windows)
or agentless or Java agent access, and configuring session settings. You can create and
configure user roles through the User Roles page from the Infranet Controller device
configuration tree.
To configure a user role:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller device for
2.
which you want to configure the user roles.
Click the Configuration tab. In the configuration tree, select Users > User Roles. The
3.
corresponding workspace appears.
Click the New button, the New dialog box appears.
4.
Add or modify settings on the General tab as specified in Table 6 on page 36.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
35