Error Messages; Nic Fax Display Messages - Ricoh fax4700l Operator's Manual

TROUBLESHOOTING
ERROR
MESSAGES
Contents
GETTING AQUAINTED IC FAX Com
WITH NIC FAX Redirector
GETTING READY TROUBLESHOOTING
INTERNET FAXING APPENDIX
USING FUNCTIONS
GLOSSARY
Index
IC FAX Monitor

NIC FAX Display Messages

The following error messages appear on the display of the NIC FAX
when a problem occurs. If the advice provided below does not solve
the problem, contact your service representative.
Message
Network Error [10-40]
Network Error [10-41]
Network Error [10-61]
Network Error [10-62]
Network Error [10-70]
Network Error [10-73]
Network Error [10-74]
Network Error [10-50]
[10-63]
[10-82]
166
Causes and Recommended Actions
• No fax IP address is set. Use the NIC FAX
control panel to set an IP address. (Page 26)
• Call your network administrator.
• Multiple IP addresses. Use the NIC FAX control
panel to check that the IP address is correct.
(Page 26)
• Call your network administrator.
• POP server cannot be found. Use IC FAX
Monitor to check whether the POP server's IP
address is correct. (Page 56)
• Call your network administrator.
• Cannot log into the POP server. Use IC FAX
Monitor to check whether login name and
password are correct.
• Call your network administrator. (Page 56)
• No SMTP server IP address is set. Use IC FAX
Monitor to register an SMTP server. (Page 56)
• Call your network administrator.
• SMTP server cannot be found. Use IC FAX
Monitor to check whether the SMTP server's IP
address is correct. (Page 56)
• Call your network administrator.
• No mail address is set for the fax machine. Use
IC FAX Monitor to set a mail address. (Page 56)
• Call your network administrator.
• A line error occurred during receipt of data.
Make sure the LAN cable is correctly connected
to the fax machine. (Page 24)
• Call your network administrator.