Simple Scanning Operation - Ricoh fax4700l Operator's Manual

INTERNET FAXING
SIMPLE SCAN-
NING OPERA-
TION
Contents
GETTING AQUAINTED IC FAX Com
WITH NIC FAX Redirector
GETTING READY TROUBLESHOOTING
INTERNET FAXING APPENDIX
USING FUNCTIONS GLOSSARY
Index
IC FAX Monitor
You can use NIC FAX as a simplified network scanner by sending a
document to your own mail address.
For this operation you can select between Standard resolution
(200 × 100 dpi) and Detail resolution (200 × 200 dpi).
Make sure that the
indicator is lit.
If the Memory indicator is not lit, press the
turn it on.
Place the document you
want to scan face down into
the feeder, and set the
scanning parameters.
Text is sent as Detail resolution (200 × 200 dpi), even if Fine
(200 × 400 dpi) is selected.
Mail
Press .
Make sure that the
Pressing Mail while a document is not set on the feeder
causes an error tone to sound.
It is not necessary to press
or Speed Dial to input the address.
To input the address, you could also use Quick Dial if your
mail address is programmed to one.
(In this case, skip step 3.)
To input the address, you could also press
Directory
and then input a Speed Dial if your mail address is
programmed to one.
(In this case, skip step 3.)
93
Memory
MEMORY TRANS.
SET DOC. OR ENTER FAX NO.
MEMORY TRANS.
ENTER FAX NUMBER
MEMORY TRANS.
ENTER Mail ADDRESS
Mail indicator is lit.
Mail if you plan to use Quick Dial
24.SEP. 15:00
MEMORY100%
Memory key to
OPTIONS ↓
<G3>
OPTIONS ↓
abc
<Mail>
Speed Dial/Tel