Ricoh fax4700l Operator's Manual page 374

ROUTINE OPERATION
2. Example: Send at 11:30pm
Enter 1 1 3 0 on the ten key pad.
To change AM/PM, press * or # on the
ten key pad.
3. Yes.
The Send Later time cannot be more
than 24 hours into the future.
Printing the Page Number (Immediate Transmission only)
This feature is called Page Count.
When your fax message is printed at the other end, page numbers will be printed
on the top of each page. Using the Page Count feature, you can select the format
in which the page numbers are printed.
If you use Page Count:
Page numbers will be printed in batch-numbering format (for example, p1/3,
p2/3, and p3/3 for a three-page message). This makes it easy for the other
party to see how many pages you sent, and if any are missing. However, you
have to input the number of pages at the keypad before sending.
If you do not use Page Count:
Page numbers will be printed only as a sequence (for example, p1, p2, p3).
This makes it difficult for the other party to tell at a glance whether any pages
are missing (for example, due to a double feed in your machine's document
feeder).
Note: If you do not select Immediate Transmission, Page Count is automatically
switched on, and the pages are counted automatically.
SENDING A FAX MESSAGE
SEND LATER PRESS YES OR NO
TODAY 11:30 PM
MEMORY TRANS.
ENTER FAX NUMBER
_
AM/PM: #
↓
OPTIONS
29