Reception Time - Ricoh fax4700l Operator's Manual

ADVANCED FEATURES

Reception Time

When you receive a message, the time is printed at the top of the page. However,
this is the time at the transmitting end. To check the local time, you have to print
the TCR.
However, if you switch on Reception Time, the local time is also printed on each
page that you receive. The time is taken from your machine's internal clock, and
is the same as the time that will be printed on the TCR. Switch this feature on if
you often receive fax messages from other countries.
Cross-references
TCR: see page 176.
To switch this feature on, do the following. (See page 7 if you need more
information about the User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 6 and 3.
2. The settings for switch 00 are now shown
on the bottom line of the display.
m
3. Press until the settings for switch 01 are
shown.
The setting that you need to change is
digit 2.
4. If you wish to change the setting, press 2.
5. Finish: Yes Function.
Note: If the message is in the memory for a while (for example confidential re-
ception, memory lock or substitute reception), the printing time is printed
at the top of the page.
Date and Time: see page 280.
PRINT LIST →
USER PARAMETER
DEFAULT: 01000000
YES TO END ↓
SWITCH00: 01000000
SWITCH00:
00000000
SWITCH01:
00000000
Digit 2
0: The reception time will not be printed.
1: The reception time will be printed.
RECEPTION
↑
131