Editing Personal Code - Ricoh fax4700l Operator's Manual

USING FUNCTIONS
EDITING A PER-
SONAL CODE
Contents
GETTING AQUAINTED IC FAX Com
WITH NIC FAX Redirector
GETTING READY TROUBLESHOOTING
INTERNET FAXING APPENDIX
USING FUNCTIONS GLOSSARY
Index
IC FAX Monitor
To change a Personal Code, you must delete the existing code and
program a new one from the beginning. Use the following procedure
when you want to change the name or routing address.
Press Function 60
If a previous function screen is already shown, you need to
No
press followed by
See page 4 of the main Operator's Manual for details on the
sequence that functions are displayed.
222271
Press .
While this screen is on the display, you can print a Personal
Code list by pressing
Operator's Manual for details on the Personal Code List.
Use the Ten-Key Pad to
input the four-digit Per-
sonal Code whose name
and routing address you
want to edit.
If you make a mistake during input, press
Press Yes .
If you want to change the
Quick Dial to which the
Personal Code is assigned,
press No .
If you don't want to change the Quick Dial, Skip to step 7.
114
.
SYSTEM SET
6 0
then instead.
PERS. CODE
-
3
and then Start . See page 92 of this
PERS. CODE
0001 XXXX
PERS. CODE
0001 XXXX
16
PERS. CODE
0001
YES TO SKIP NO TO CANCEL
-
-
NO TO CANCEL
ENTER ID CODE
PRINT LIST →
NO TO CANCEL
YES OR NO
CLR: CLR
No
and input again.
YES OR NO
CHOOSE KEY