Ricoh fax4700l Operator's Manual page 80

ADVANCED FEATURES
Storing a Keystroke Program
1. Make sure that the machine is in standby
mode (see page 24).
2. Place a sheet of paper in the feeder.
Skip step 2 if you are making a
Polling Reception program.
3. Select all required features (such as
Transfer Request) and telephone num-
bers as you would normally do.
Contrast, resolution, and halftone
cannot be stored in a keystroke
program.
4. Press the Quick Dial key or Speed Dial
with two digits code that you wish to
store the program in.
Example: 01 of the Quick Dial.
or
Speed Dial, 1 and 0.
Make sure that this key is vacant.
5. To complete the program: Yes.
Note: The procedure that you just stored will now begin. If you do not wish to
use the procedure now, press Stop immediately.
MEMORY TRANS. APR.4.12:25PM
SET DOC. OR ENTER FAX NO.
MEMORY 100%
MEMORY TRANS.
ENTER FAX NUMBER
_
PROGRAM?
YES OR NO
TRANSMISSION
↓
OPTIONS
69