Ricoh fax4700l Operator's Manual page 559

OPERATING DIFFICULTIES
Problem
Stripes on copies.
TELEPHONING
You can't receive phone calls;
the unit only rings once then
goes into receive mode.
You can't receive phone calls;
the unit does not ring.
POLLING
Dialing took place, but polling
could not.
214
The exposure glass is dirty.
•
Clean the exposure glass (see page 189).
Do user maintenance, especially glass [E] (see page 188).
You are in Auto Receive mode.
•
Change to Manual Receive mode
(see page 39).
The telephone line is not connected.
•
Connect the modular cord (see page 277).
ID Codes do not match.
•
Contact the person at the other end and make
sure that the ID Codes are the same before trying the
communication again.
SOLVING PROBLEMS
Action Required